Have you ever experienced a burnt taste when vaping? It can be frustrating and ruin your vaping experience. In this article, we will explore the causes of burnt hits and provide effective solutions to prevent and fix them. By understanding why your vape may taste burnt and how to overcome this issue, you can enjoy a smooth and flavorful vaping experience.
When a vape is burnt, it means that the coil or the e-juice is overheating, resulting in an unpleasant taste. There are several reasons why this can happen, such as vaping with a burnt coil, using low-quality e-juice, or not properly priming your coils. It’s important to address these issues to avoid burnt hits and continue enjoying your vaping sessions.
Key Takeaways:
- Burnt hits can ruin your vaping experience, but they can be prevented and fixed.
- Common causes of burnt hits include using a burnt coil, low-quality e-juice, and improperly primed coils.
- Properly priming your coils is crucial to prevent burnt hits. Take the time to saturate the wick before vaping.
- Signs of a burnt coil include a burnt taste, decreased vapor production, and loss of flavor.
- If your new coil tastes burnt, it could be a faulty coil that needs to be replaced.
What Causes a Burnt Hit?
Experiencing a burnt hit while vaping can be quite unpleasant. It can leave a lingering burnt taste in your mouth and ruin your vaping session. Understanding the causes of burnt hits is crucial in order to prevent them and enjoy a smooth vaping experience.
Causes of Burnt Hits
There are several factors that can lead to burnt hits:
- Vaping at high wattages: When you vape at high wattages, the coil gets hotter and vaporizes the e-liquid faster than the wick can absorb it. This results in a burnt taste.
- Chain vaping: Chain vaping refers to taking consecutive puffs without giving the wick enough time to re-saturate with e-liquid. This can lead to dry hits and burnt flavor.
- Vaping with high-VG e-liquids: Vegetable glycerin (VG) is a thick ingredient commonly found in e-liquids. Using high-VG e-liquids in tanks with small wick channels can cause inadequate e-liquid flow, leading to burnt hits.
- Not priming coils properly: Priming coils involves saturating the wick with e-liquid before vaping. Failing to properly prime the coils can result in dry hits and burnt taste.
Burnt Hits vs. Dry Hits
While burnt hits and dry hits are often used interchangeably, they are slightly different:
A burnt hit refers to the unpleasant burnt taste caused by excessive heat and lack of e-liquid saturation on the wick.
A dry hit, on the other hand, occurs when there is insufficient e-liquid in the tank or when the wick is not adequately saturated with e-liquid. This can result in a harsh and dry flavor.
To avoid both burnt hits and dry hits, it is important to ensure proper e-liquid saturation of the wick and moderate vaping practices.
Preventing Burnt Hits
To prevent burnt hits, consider the following:
- Use the recommended wattage range for your coil to avoid overheating and scorching the e-liquid.
- Take breaks between puffs to allow the wick to re-saturate with e-liquid.
- If using high-VG e-liquids, ensure your tank has sufficient wick channels to handle the thicker viscosity of the liquid.
- Properly prime your coils by saturating the wick before vaping. This involves dripping e-liquid onto the coil or letting it soak in a filled tank for a few minutes.
By following these preventive measures, you can enjoy a consistently pleasant and flavorful vaping experience without the fear of burnt hits.
How to Prime Your Coils: Stop the Burnt Hits
Properly priming your coils is crucial to prevent burnt hits. Whether you’re using a vape tank or refillable pods, following the right priming process ensures that the wick is adequately saturated, resulting in a smooth and flavorful vaping experience.
Priming Vape Tank Coils
When priming vape tank coils, start by dripping a few drops of e-liquid directly onto the wicking holes and inside the coil head. This helps to saturate the wick and prevent it from burning. Next, assemble the tank and fill it with e-liquid. Make sure to let the tank sit for about 10 minutes before taking your first hit. This waiting period allows the wick to fully soak up the e-liquid and prepares it for optimal performance.
Priming Refillable Pods
Priming refillable pods is a simpler process. Begin by filling the pod with your preferred e-liquid. After filling, give the pod a gentle shake to ensure the e-liquid spreads evenly throughout the wick. Then, let it sit for approximately 10 minutes to allow the wick to fully saturate. This ensures that the coil is ready to deliver a rich and flavorful vaping experience.
By properly priming your coils, you can effectively prevent burnt hits and enjoy a consistent vaping experience with enhanced flavor and vapor production. Remember, taking a few extra minutes to prime your coils can make a world of difference in the quality of your vape.
How to Tell if Your Coil is Burnt
As a vaper, it’s essential to recognize the signs of a burnt coil to prevent the unpleasant taste that comes with continued use of a damaged coil. Here are a few indicators that it might be time to change your coil:
- Loss of Flavor: One of the first signs of a burnt coil is a noticeable decrease in the flavor of your e-liquid. If you notice a muted or unpleasant taste, even with new e-liquid, it may be a sign that your coil is burnt.
- Decreased Vapor Production: A burnt coil can also lead to a decrease in vapor production. If you notice less vapor coming out when you exhale, it could be a sign that your coil is no longer functioning properly.
The lifespan of a coil depends on a variety of factors, such as your e-liquid consumption, the ingredients in your e-liquid, and the wattage you use. Generally, a properly primed coil can last anywhere from five days to two weeks. However, it’s important to monitor the flavor and performance of your coil to determine when it needs to be changed.
Expected Lifespan of Coils
| Factors | Expected Lifespan |
|---|---|
| E-liquid Consumption | 5-14 days |
| E-liquid Ingredients | 5-14 days |
| Wattage Used | 5-14 days |
While this table provides a general guideline, it’s important to remember that each vaping experience is unique. Pay attention to any changes in flavor or vapor production, and if you experience any of the signs mentioned earlier, it’s time to change your coil.
Knowing when to change your coil is essential for maintaining a flavorful vaping experience. By being aware of the signs of a burnt coil and monitoring your coil’s performance, you can ensure a consistent and enjoyable vaping experience.
Does Your New Coil Taste Burnt?
Sometimes, even with proper priming, a new coil may still have a burnt taste. This can be frustrating for vapers who are looking forward to a fresh and enjoyable vaping experience. In such cases, it is important to understand that the issue might not be related to your priming technique, but rather to a faulty new coil.
An occasional burnt taste when using a new coil can be attributed to certain manufacturing defects. These defects can prevent the coil from properly heating the e-liquid, resulting in a burnt flavor. If you encounter a consistently burnt taste with a new coil, it is advisable to stop using it and contact the manufacturer for assistance.
While it is rare, there can be instances where a batch of coils is defective. Manufacturers usually have customer support channels to address such issues, and they may provide a replacement or offer a solution to ensure you have a satisfactory vaping experience.
Remember, the purpose of a new coil is to enhance the flavor and vapor production of your vape device. If you experience a burnt taste with a new coil, it is crucial to address the issue promptly to avoid continuous disappointment and potential damage to your device.
“If you encounter a consistently burnt taste with a new coil, it is advisable to stop using it and contact the manufacturer for assistance.”
To illustrate the potential impact of a faulty new coil, consider the following table:
| New Coil Flavor | Faulty Coil Flavor | Manufacturing Support |
|---|---|---|
| Fresh and flavorful | Consistently burnt | Available for replacements |
This table showcases the contrast between the expected flavor from a new coil and the unfavorable taste experienced with a faulty coil. It also emphasizes the significance of contacting the manufacturer for assistance, as they typically provide support for these situations, ensuring you receive a replacement or suitable resolution.
Don’t let a faulty new coil ruin your vaping experience. Take action and reach out to the manufacturer for guidance and support, allowing you to enjoy the full potential of your vape device.
When to Contact the Manufacturer:
- Consistently burnt taste with a new coil
- No improvement in flavor after priming
- Unsatisfactory vapor production
Conclusion
Burnt hits can be frustrating for vapers, but with proper knowledge and care, they can be easily prevented and fixed. By understanding the causes of burnt hits and following the steps to prime coils and properly maintain them, vapers can enjoy a smooth and flavorful vaping experience.
Regularly monitoring the performance of coils and knowing when to change them is also essential. By recognizing the signs of a burnt coil, such as a loss of flavor and decreased vapor production, vapers can avoid using faulty coils and prevent unpleasant tastes.
Remember, a burnt hit doesn’t have to ruin your vaping experience – take the necessary steps to prevent and fix it. With proper priming, attention to wattage, and using suitable e-liquids, vapers can ensure that their coils stay in optimal condition, providing satisfying and enjoyable vape sessions. So, stay informed, take care of your coils, and vape on!
FAQ
What does it mean when a vape is burnt?
When a vape is burnt, it refers to the unpleasant taste and experience of inhaling a vape hit that has been overheated and has a burnt flavor.
Why does my vape taste burnt?
There are several reasons why a vape may taste burnt, including vaping at high wattages, chain vaping, using high-VG e-liquids in tanks with small wick channels, and not properly priming the coils.
What causes a burnt vape coil?
Burnt vape coils can be caused by not enough e-liquid saturating the wick, resulting in the wick being heated without adequate moisture.
How can I fix a burnt vape taste?
To fix a burnt vape taste, you can start by properly priming your coils and ensuring they are adequately saturated with e-liquid before vaping. It may also be necessary to change the coil if it is consistently producing a burnt taste.
How do I prevent a burnt vape hit?
Preventing burnt vape hits can be achieved by vaping at appropriate wattages, taking breaks between puffs to avoid chain vaping, using e-liquids that are compatible with the wick channels in your tank, and properly priming your coils.
What are the signs of a burnt vape coil?
Signs of a burnt vape coil include a loss of flavor and a decrease in vapor production. If you experience these, it may be time to change your coil.
How long do vape coils last before they burn out?
The lifespan of a vape coil can vary, but properly primed coil heads can typically last anywhere from five days to two weeks. Monitoring the flavor and performance of the coil will help determine when it needs to be changed.
Why does my new coil taste burnt?
If your new coil consistently has a burnt taste, it could be due to a faulty coil that needs to be replaced. In rare cases, a batch of coils may be defective, and contacting the manufacturer for assistance is advisable.
Can burnt hits be prevented and fixed?
Yes, burnt hits can be prevented and fixed by understanding the causes of burnt hits, properly priming coils, and regularly monitoring coil performance. Taking these steps will help ensure a smooth and flavorful vaping experience.